MPPT control wind-generator output, make sure power max. input to battery and high charging efficiency obtained.
E-dump load inset. Avoid short-circuit way damage PMG
Corrosion Prevention, Waterproof: quality aluminum alloy overall, surface oxidation frosted.
12V/24V System Automatic Recognition function: no need to purchase different controllers for different system, it reduces buyer’s cost.
|Be able to brake wind-turbine when battery damaged or no connection
Be able to endure battery connection reverse.
Be able to endure solar panel connection reverse.
Performance comparison table
Performance |
Advanced controller |
advantages and disadvantages |
Dump mode (high wind Speed protection) |
Inset PWM Dump-load |
To avoid overheating, damage and other situation caused by short-circuit dump-load way. And also avoid inconvenience of installing the external dump-load. |
Boost function |
Independent Boost Circuit |
Low cost and good effective |
12V/24V Compatible |
Automatic Identification |
No need to purchase different controllers for different system |
Overall Corrosion Prevention |
High quality aluminum cover |
Excellent heat dissipation, Anticorrosion and waterproof |
Rectifier Anti-reverse charging |
Special Module |
increase reliability |
Radiating effect
|
Machine no significant thermal |
Ensure the stability of equipment operation |
Product Function Introduction
Current limiting/voltage limiting
Dump load wind power
Various convent protection function
Users could set parameters manually
Real-time data communication
Multi-type output definition, users can set on their own
Battery management definition
1. 12V system voltage protection
Over-discharge Voltage (factory default) |
10-12 adjustable (10.8) |
Vol. |
Over-discharge Recovery Voltage (factory default) |
11-13 adjustabl (15.0) |
Vol. |
Over-charge Voltage (factory default) |
14-18 adjustabl (4.4) |
Vol. |
Over-charge Recovery Voltage (factory default) |
14-18 adjustabl (16.0) |
Vol. |
2. 24V system voltage protection
Over-discharge Voltage (factory default) |
18-22 adjustable (20.0) |
Vol. |
Over-discharge Recovery Voltage (factory default) |
22-28 adjustable (25.0) |
Vol. |
Over-charge Voltage (factory default) |
25-32 adjustable (28.8) |
Vol. |
Over-charge Recovery Voltage (factory default) |
24-30 adjustable (26.0) |
Vol. |
3 Output Set-up function:
Each Line Output Max. Current |
15 |
Amp |
Each Line Output Max. Power |
150 |
Wp |
Output Mode |
Light-control on/off; time-control on/off; half-power/full-power |
|
PV panel set-up definition
Max PV power |
200 |
Wp |
12V system max open circuit voltage |
38.0 |
Vol. |
24V system max open circuit voltage |
46.0 |
Vol. |
PV cell max charge current |
35.0 |
Amp |
Product Conventional parameter
Display |
super large LCD (Backlit) |
Display Content |
Battery Voltage, Charge Current, Wind Turbine Voltage/Current, PV Voltage/Current, Wind Turbine Power, PV Power, over-charge voltage, over-discharge voltage, overload, Short circuit, Night and other working status |
Standard communication interface |
RS232(adjustable RS485,RJ45,GPRS etc.) |
Temperature compensation (optional) |
4mV/℃/2V ,–35℃--+80℃, precision:±1℃ |
Operating temperature |
-20 ~ +50< |